铁路数字信号电缆自动测试系统的设计与研究

CTS-RW铁路数字信号电缆自动测试系统是对铁路数字信号电缆的电气性能参数进行自动测试的高精度专用测试设备.介绍了其测试原理、硬件设计及软件设计,并通过与标准件及专用测试仪器的比对实验验证了测试数据的准确性.     

A stochastic model of traffic flow: Theoretical foundations

In a variety of applications of traffic flow, including traffic simulation, real-time estimation and prediction, one requires a probabilistic model of traffic flow. The usual approach to constructing such models involves the addition of random noise terms to deterministic equations, which could lead to negative traffic densities and mean dynamics that are inconsistent with the original deterministic dynamics. This paper offers a new stochastic model of traffic flow that addresses these issues. The source of randomness in the proposed model is the uncertainty inherent in driver gap choice, which is represented by random state dependent vehicle time headways. A wide range of time headway distributions is allowed. From the random time headways, counting processes are defined, which represent cumulative flows across cell boundaries in a discrete space and continuous time conservation framework. We show that our construction implicitly ensures non-negativity of traffic densities and that the fluid limit of the stochastic model is consistent with cell transmission model (CTM) based deterministic dynamics.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Model based urban traffic control,part II: Coordinated model predictive controllers

The present paper describes how to use coordination between neighbouring intersections in order to improve the performance of urban traffic controllers. Both the local MPC (LMPC) introduced in the companion paper (Hao et al., 2018) and the coordinated MPC (CMPC) introduced in this paper use the urban cell transmission model (UCTM) (Hao et al., 2018) in order to predict the average delay of vehicles in the upstream links of each intersection, for different scenarios of switching times of the traffic lights at that intersection. The feedback controller selects the next switching times of the traffic light corresponding to the shortest predicted average delay. While the local MPC (Hao et al., 2018) only uses local measurements of traffic in the links connected to the intersection in comparing the performance of different scenarios, the CMPC approach improves the accuracy of the performance predictions by allowing a control agent to exchange information about planned switching times with control agents at all neighbouring intersections. Compared to local MPC the offline information on average flow rates from neighbouring intersections is replaced in coordinated MPC by additional online information on when the neighbouring intersections plan to send vehicles to the intersection under control. To achieve good coordination planned switching times should not change too often, hence a cost for changing planned schedules from one decision time to the next decision time is added to the cost function. In order to improve the stability properties of CMPC a prediction of the sum of squared queue sizes is used whenever some downstream queues of an intersection become too long. Only scenarios that decrease this sum of squares of local queues are considered for possible implementation. This stabilization criterion is shown experimentally to further improve the performance of our controller. In particular it leads to a significant reduction of the queues that build up at the edges of the traffic region under control. We compare via simulation the average delay of vehicles travelling on a simple 4 by 4 Manhattan grid, for traffic lights with pre-timed control, traffic lights using the local MPC controller (Hao et al., 2018), and coordinated MPC (with and without the stabilizing condition). These simulations show that the proposed CMPC achieves a significant reduction in delay for different traffic conditions in comparison to these other strategies.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

基于名义应力法的动车组车体净水箱吊装部件疲劳强度分析

针对高速运行动车组车体悬挂设备振动疲劳损伤问题,以某型动车组车顶净水箱吊装结构为研究对象,采用名义应力法对吊装结构的焊缝部位进行疲劳强度评估.根据EN 12663标准确定净水箱的工作载荷工况,采用有限元法计算了各工况下结构的振动响应,并基于BS标准计算了焊缝疲劳评估点的寿命.假定各载荷工况出现频率相同的情况下,构造了工作载荷历程,采用Fe-safe软件对焊缝的疲劳寿命进行了仿真分析.两种方法分析结果均表明:焊缝1与焊缝2寿命最低,是结构最易发生疲劳破坏的位置;焊缝位于筋板表面的焊趾寿命低于位于主支撑板表面的焊趾寿命.     

Modeling the Car-Truck Interaction in a System-Optimal Dynamic Traffic Assignment Model

Several transportation problems, such as implementation of truck-only lanes, require understanding the interaction of heterogeneous dynamic traffic flows in order to provide accurate solutions. System-optimal dynamic traffic assignment can be modeled using a network loading procedure based on the cell transmission model, that is, the hydrodynamic wave model, and solved by linear programming. However, this framework cannot handle the asymmetric integration between the flow of trucks and cars. This article presents a novel formulation for network loading in system-optimal dynamic traffic assignment considering car–truck interactions. By using an embedded cell transmission model, this formulation incorporates a set of assumptions related to the kinematic characteristics of the flow of cars, trucks, and their interactions that can be solved using linear programming. We present numerical results supporting our modeling assumptions. Likewise, the observed emergent behavior captures the car–truck interactions accurately and indicates that minimum system-optimal travel time is obtained by encouraging cars to use highways with shorter distances.     

Did California’s hand-held cell phone ban reduce accidents?

On July 1st, 2008, California enacted a ban on hand-held cell phone use while driving. Using California Highway Patrol panel accident data for California freeways from January 1st, 2008 to December 31st, 2008, we examine whether this policy reduced the number of accidents on California highways. To control for unobserved time-varying effects that could be correlated with the ban, we use high-frequency data and a regression discontinuity design. We find no evidence that the ban on hand-held cell phone use led to a reduction in traffic accidents.     

基于FMECA故障分析的高速动车组制动系统RAMS研究

高速动车组制动系统RAMS管理能够保证车辆在其全寿命周期内达到其功能要求。文章以CRH2型高速动车组制动系统为对象建立了可靠性模型,利用FMECA方法,系统地分析了制动系统的故障模式影响及危害性,并将其可能的故障模式按严重程度分类,以便采取改进措施。     

CRH3动车组单车隧道压力波特性估算

采用国内研制的高速列车通过隧道时压力波计算程序,模拟了特定隧道条件下CRH3动车组单车隧道压力波的基本特性,给出了隧道内、车头车尾处的压力波分布情况,以及对应车内处3 s内最大压差值等随车速变化的规律。同时,比较了动车组在德国和我国隧道条件下压力波的异同点。